English
Español
Français
Português
BTC
ETH
LTC
BCH
USDT
DOGE
DASH
USDC
XRP
XMR
TRX
BNB
SHIB
SOL
DAI
ZEC
ETC
POL
ADA
XLM
Pro-Ject Debut EVO 2 | Audiophile Turntable
$799
₿ 0.01191
Key specifications
- Weight
- 13 lbs
- Dimensions
- 16.3" x 12.6" x 4.5"
- Speed
- 33, 45
- Drive
- belt drive, electronic speed control
- Platter
- 12" | 3.75 lb aluminum
- Platter damping
- TPE damping ring + felt mat
Specifications
- Weight
- 13 lbs
- Dimensions
- 16.3" x 12.6" x 4.5"
- Speed
- 33, 45
- Drive
- belt drive, electronic speed control
- Platter
- 12" | 3.75 lb aluminum
- Platter damping
- TPE damping ring + felt mat
- Main bearing
- stainless steel, bronze bushing
- Wow & flutter
- 33: +/-0.16% | 45: +/-0.14%
- Speed drift
- 33: +/-0.40% | 45: +/-0.50%
- SNR
- 68dB
- Tonearm
- Carbon fiber 1-piece tube
- Effective arm length
- 8.6"
- Effective arm mass
- 10.0g
- Overhang
- 0.73"
- Power
- 4W / 0W standby
- Frequency range
- 20-20.000Hz
- Channel separation
- 22dB/1kHz
- Output voltage
- 7mV
- Recommended load impedance
- 47kΩ (MM input)
- Compliance/stylus type
- 10µm/mN – elliptical
- Recommended tracking force
- 18mN
Description
Experience Unparalleled Value and Quality With the Debut EVO 2, Pro-Ject's Much Anticipated Sequel to Their Most Popular Turntable
Includes Pick it MM EVO cartridge
Improved Tonearm Bearing Block and Counterweight
Streamlined 8.6" one-piece carbon-fiber tonearm with sapphire bearings for greater tracking precision and audio reproduction
Improved, solid 3.75 lb die-cast Aluminum platter w/ TPE damping
Electronic speed switch, 33 and 45 RPM
8-coat hand-painted resonance-resistant MDF chassis
Manufactured in the European Union
What's New in the EVO 2?
Pro-Ject's improved and updated Debut EVO 2 turntable offers incredible value at its price point and represents a premium choice for the listener looking for a basic vinyl table with an accessible price tag. Debut EVO 2 introduces several enhancements over the original Debut Carbon EVO, aiming to refine performance and listening experience for vinyl enthusiasts:
Tonearm Bearing and Assembly: The EVO 2 features an improved tonearm bearing block, similar to that of the Debut Pro, designed to minimize friction and enhance tracking accuracy.
Platter Upgrade: Replacing the steel platter of the original, the EVO 2 utilizes a die-cast Aluminum platter with a TPE (thermoplastic elastomer) damping ring. This design reduces unwanted resonances and allows for the use of moving coil cartridges without magnetic interference.
Cartridge Enhancement: The Debut EVO 2 comes pre-installed with the new Pick It MM EVO moving magnet cartridge, co-designed with Ortofon, optimized for synergy with the tonearm.
Chassis and Connectivity: The updated chassis integrates the RCA and power connections into the plinth, offering a sleeker design and easier access compared to the previous model.
Premium Tonearm
The Debut EVO 2 turntable features an 8.6” carbon fiber armtube with a sturdy aluminum bearing block (like Debut PRO), ensuring precise, stable tracking. Its one-piece armtube and headshell design minimize resonance, optimizing cartridge performance for detailed, immersive sound.
Adaptive Anti-Skating MechanismAs the skating force varies between the inner and outer grooves of a vinyl record, Pro-Ject's anti-skating mechanism adjusts accordingly.
Carbon Fiber Tonearm TubeSuper stiff and light-weight one-piece 8.6" carbon tonearm design.
Massive Low-Friction BearingThe CNC-milled Aluminum bearing block facilitates very low friction & high rigidity.
TPE-Damped Die-Cast Platter
The 3.75 lbs die-cast Aluminum platter is precision-balanced and features a TPE damping ring to minimize resonance and enhance stability. Upgrading from the previous steel design, the Debut EVO 2 supports moving coil cartridges for improved performance.
Height-Adjustable Damped Feet
The Debut EVO 2 stands on three height-adjustable TPE-damped feet for easy leveling & great isolation. By using 3 feet they are able to increase stability on uneven surfaces while minimizing surface-contact.
Pick it MM EVO Phono Cartridge
The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It compliments the tonearm sonically & aesthetically. Teaming up with Danish cartridge specialists for development, Pro-Ject implemented split-pole pins known for achieving a flat frequency response typically only achievable with moving coil designs.
High-Quality RCA/Ground Cables
Pro-Ject includes the Connect it Phono E RCA cable, designed for optimal phono signal transmission with high-quality materials to minimize loss. The Debut EVO 2 features a balanced-capable RCA/ground phono output, compatible with RCA to mini XLR cables for use with balanced phono stages like the Phono Box DS3 B or Tube Box DS3 B.
Sophisticated DC/AC Generator
Pro-Ject turntables use switch-mode power supplies to convert AC to DC, which is then regenerated into a clean sine wave. This process eliminates power impurities (like dirty AC power), ensuring stable motor performance and improved speed accuracy.
Specifications
General
Pro-Ject 2 Year Warranty
Debut EVO 2 User Manual
Turntable
MM-Cartridge
Weight: 7.2g
In the Box
Debut EVO 2
Pick it MM EVO cartridge
Acrylic dust cover
Drive belt for 33 1/3 & 45rpm
Drive belt for 78rpm
Adapter for 7″ singles
Connect-It E phono cable w/ ground
Felt record mat
15V DC / 0.8A power supply
Includes Pick it MM EVO cartridge
Improved Tonearm Bearing Block and Counterweight
Streamlined 8.6" one-piece carbon-fiber tonearm with sapphire bearings for greater tracking precision and audio reproduction
Improved, solid 3.75 lb die-cast Aluminum platter w/ TPE damping
Electronic speed switch, 33 and 45 RPM
8-coat hand-painted resonance-resistant MDF chassis
Manufactured in the European Union
What's New in the EVO 2?
Pro-Ject's improved and updated Debut EVO 2 turntable offers incredible value at its price point and represents a premium choice for the listener looking for a basic vinyl table with an accessible price tag. Debut EVO 2 introduces several enhancements over the original Debut Carbon EVO, aiming to refine performance and listening experience for vinyl enthusiasts:
Tonearm Bearing and Assembly: The EVO 2 features an improved tonearm bearing block, similar to that of the Debut Pro, designed to minimize friction and enhance tracking accuracy.
Platter Upgrade: Replacing the steel platter of the original, the EVO 2 utilizes a die-cast Aluminum platter with a TPE (thermoplastic elastomer) damping ring. This design reduces unwanted resonances and allows for the use of moving coil cartridges without magnetic interference.
Cartridge Enhancement: The Debut EVO 2 comes pre-installed with the new Pick It MM EVO moving magnet cartridge, co-designed with Ortofon, optimized for synergy with the tonearm.
Chassis and Connectivity: The updated chassis integrates the RCA and power connections into the plinth, offering a sleeker design and easier access compared to the previous model.
Premium Tonearm
The Debut EVO 2 turntable features an 8.6” carbon fiber armtube with a sturdy aluminum bearing block (like Debut PRO), ensuring precise, stable tracking. Its one-piece armtube and headshell design minimize resonance, optimizing cartridge performance for detailed, immersive sound.
Adaptive Anti-Skating MechanismAs the skating force varies between the inner and outer grooves of a vinyl record, Pro-Ject's anti-skating mechanism adjusts accordingly.
Carbon Fiber Tonearm TubeSuper stiff and light-weight one-piece 8.6" carbon tonearm design.
Massive Low-Friction BearingThe CNC-milled Aluminum bearing block facilitates very low friction & high rigidity.
TPE-Damped Die-Cast Platter
The 3.75 lbs die-cast Aluminum platter is precision-balanced and features a TPE damping ring to minimize resonance and enhance stability. Upgrading from the previous steel design, the Debut EVO 2 supports moving coil cartridges for improved performance.
Height-Adjustable Damped Feet
The Debut EVO 2 stands on three height-adjustable TPE-damped feet for easy leveling & great isolation. By using 3 feet they are able to increase stability on uneven surfaces while minimizing surface-contact.
Pick it MM EVO Phono Cartridge
The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It compliments the tonearm sonically & aesthetically. Teaming up with Danish cartridge specialists for development, Pro-Ject implemented split-pole pins known for achieving a flat frequency response typically only achievable with moving coil designs.
High-Quality RCA/Ground Cables
Pro-Ject includes the Connect it Phono E RCA cable, designed for optimal phono signal transmission with high-quality materials to minimize loss. The Debut EVO 2 features a balanced-capable RCA/ground phono output, compatible with RCA to mini XLR cables for use with balanced phono stages like the Phono Box DS3 B or Tube Box DS3 B.
Sophisticated DC/AC Generator
Pro-Ject turntables use switch-mode power supplies to convert AC to DC, which is then regenerated into a clean sine wave. This process eliminates power impurities (like dirty AC power), ensuring stable motor performance and improved speed accuracy.
Specifications
General
Pro-Ject 2 Year Warranty
Debut EVO 2 User Manual
Turntable
MM-Cartridge
Weight: 7.2g
In the Box
Debut EVO 2
Pick it MM EVO cartridge
Acrylic dust cover
Drive belt for 33 1/3 & 45rpm
Drive belt for 78rpm
Adapter for 7″ singles
Connect-It E phono cable w/ ground
Felt record mat
15V DC / 0.8A power supply
SKU: PJ-DEBUT-EVO-2-HGB
More from Bloom Audio
All products
$799
₿ 0.01191
