Fingerprint scanner

Watch the tutorial on YouTube

Replacement Instructions

5 min
Very Easy

Requirements:

A soft surface
– You can use a towel, for example
Spudger
Micro-screwdriver

Place the SHIFTphone upside down on a soft surface.

This prevents scratches on the SHIFTphone.

Then, remove the battery cover using the opener on the side of the battery cover.

Place the SHIFTphone with the camera facing up on a soft surface.

Take the opener and insert one end beneath the battery in the middle.

Then, make a 45-degree movement with the opener and lift the battery up.

Carefully unscrew all 8 screws.

Use the appropriate screwdriver to avoid damage.

Set the screws aside so you don’t lose them.

Hold the SHIFTphone firmly on both sides.

Unscrew the attachments at the bottom.

Apply just enough force to unscrew them.

Use a spudger to gently pry the screen loose.

Run along the edges to unclip the clips.

Do not detach the screen without first loosening everything.

Use an opening tool to gently create space around the fingerprint scanner.

Place the tool under the edge of the scanner and carefully pry it loose.

Remove the fingerprint scanner completely without damaging the cables.

Gently place the new fingerprint scanner in the correct position.

Ensure the scanner fits well and is properly aligned.

Press the scanner firmly to make sure it is securely in place.

Carefully place the screen display back onto the casing.

Press down firmly along the edges of the screen.

Check that the screen is securely attached all around.

Reinsert the SHIFTphone battery.

Place it in the correct orientation in the SHIFTphone.

With the SHIFT logo facing up and the + and – in the top left.

Turn the SHIFTphone upside down again on a soft surface.

Take the battery cover and place it back on the SHIFTphone in the correct position.

Press down firmly at 8 points to secure the battery cover.