Screen part (full assembly)

Watch the tutorial on YouTube


Replacement Instructions

45 min
Hard

Required tools:

A soft surface
– For example, you can use a towel

A small container to store the screws
– Make sure you don’t lose any screws

Screen part (full assembly)
Screwdriver
Spudger (or a similar plastic tool)
Thermal paste with spatula
Metal cleaner
Moist wipes
Microfiber cleaning cloth

Place the laptop upside down on a soft surface.

This prevents scratches on the laptop lid.

Then remove all screws using the screwdriver.

Insert the spudger between the bottom cover and the hinge.

Gently apply pressure near the hinge on both sides.

You can now carefully remove the entire bottom cover.

Disconnect the battery.

Then disconnect the two other cables that are attached to the heatsink.

Be careful — the cables may be quite tight.

Use a screwdriver to remove the screws.

The screws labeled with numbers 1 and 2 cannot be completely removed.

The screws labeled with numbers 3, 4, and 5 can be fully removed.

To loosen the hinges, remove the screws.

After removing the screws, disconnect the display cable.

Gently guide the display cable toward the hinges.

To loosen the hinges, remove the screws.

After removing the screws, disconnect the camera and microphone module.

Carefully guide the camera and microphone module toward the hinges.

Take a spudger and carefully place it under the hinge.

Note: this is not easy to do.

Apply a fair amount of force and push the hinges upward until they can’t move any further.

When the hinges are lifted, some cables may be in the way.

Make sure to click the cables just past the grey edge.

If this is not done correctly, you won’t be able to remove the screen.

Hold the chassis with both hands at the outer corners.

Carefully lift the chassis upward towards the hinges.

When you reach the hinges, gently unclip the chassis from the screen.

Place the new screen flat in front of you, just like before.

Install the C-cover onto your new screen.

When clicking it into place at the hinges, make sure the C-cover hooks properly behind them.

Guide the camera and microphone module back toward its connector.

Do the same with the display cable. Note: it can only be reconnected in one way — do not force it.

Press the hinges back into their original position. They should fit perfectly through the grey circular openings.

Insert 2 screws on the left side where you see the small plus marks.

Insert 3 screws on the right side (see photo).

Important: make sure the screws go into the correct positions.

Use a spatula to remove the thermal paste from both the motherboard and the heatsink.

Wipe the area with a damp cloth.

Use the metal cleaner to remove any remaining residue.

Take a bit of thermal paste from the container and spread it evenly across the spatula.

Use the spatula to spread the paste evenly over the CPU.

Important: the CPU surface (mirror) should no longer be visible, and the paste must be evenly distributed.

Place the screws back in their correct positions.

Reconnect the two heatsink cables to their connectors.

Also reconnect the battery cable.

Place the bottom cover back in the correct position.

Gently press down around all edges.

Make sure the bottom cover fits properly all around.

Use the screwdriver to fasten all screws back into place.

This was the final step — your laptop is now ready for use.

Well done!

×
❮

❯

.image-container {
}

.zoom-image, .aligncenter.size-large {
}

.zoom-image:hover {
}

.zoomoverlay {
display: none;
position: fixed;
transition: opacity 0.3s ease !important; /* Fade effect */
}

.zoomoverlay.show {
display: flex; /* Make it a flex container when shown */
opacity: 1; /* Fully visible */
}

.zoomoverlay img {
}

#close {
position: absolute;
top: 20px;
}
.nav-btn {
position: absolute;
top: 50%;
transform: translateY(-50%);
background-color: rgba(255, 255, 255, 0.3);
font-size: 24px;
transition: background-color 0.3s ease;
z-index: 11;
}

.nav-btn:hover {
background-color: rgba(255, 255, 255, 0.6);
}

.prev-btn {
left: 20px;
}

.next-btn {
right: 20px;
}

document.addEventListener('DOMContentLoaded', function() {
const parentDiv = document.getElementsByClassName('repair-badges')[0].parentElement;
const images = parentDiv.querySelectorAll('img[src$=".png"]');
let imageArray = []; // Array om alle afbeeldingen op te slaan
let currentImageIndex = 0; // Huidige afbeelding bijhouden

images.forEach((image, index) => {
// Check if the image is inside an anchor tag and skip if it is
if (image.parentElement.tagName.toLowerCase() === 'a') {
return; // Skip this image
}

image.classList.add('zoom-image'); // Add the zoom class
imageArray.push(image); // Voeg toe aan array

image.addEventListener('click', function() {
currentImageIndex = imageArray.indexOf(this); // Stel huidige index in
showImage(this.src);
});
});

function showImage(src) {
const overlay = document.getElementById('zoomoverlay');
const enlargedImage = document.getElementById('enlargedImage');
let originalSrc = src;

// Check for the '300x' in the filename
if (originalSrc.includes('300x')) {
const lastDashIndex = originalSrc.lastIndexOf('-');
if (lastDashIndex !== -1) {
originalSrc = originalSrc.substring(0, lastDashIndex) + '.png';
}
}

enlargedImage.src = originalSrc;

// Show the overlay with fade-in
overlay.style.display = 'flex';
setTimeout(() => {
overlay.classList.add('show');
}, 10);
}

function navigateImage(direction) {
if (imageArray.length === 0) return;

if (direction === 'next') {
currentImageIndex = (currentImageIndex + 1) % imageArray.length;
} else if (direction === 'prev') {
currentImageIndex = (currentImageIndex - 1 + imageArray.length) % imageArray.length;
}

showImage(imageArray[currentImageIndex].src);
}

document.getElementById('close').addEventListener('click', closeOverlay);
document.getElementById('prevBtn').addEventListener('click', () => navigateImage('prev'));
document.getElementById('nextBtn').addEventListener('click', () => navigateImage('next'));

// Close overlay if clicking elsewhere on the overlay
document.getElementById('zoomoverlay').addEventListener('click', function(e) {
if (e.target !== this && !e.target.classList.contains('nav-btn')) return;
closeOverlay();
});

// Keyboard navigation
document.addEventListener('keydown', function(event) {
const overlay = document.getElementById('zoomoverlay');
if (!overlay.classList.contains('show')) return; // Alleen actief als modal zichtbaar is

if (event.key === 'Escape') {
closeOverlay();
} else if (event.key === 'ArrowRight') {
navigateImage('next');
} else if (event.key === 'ArrowLeft') {
navigateImage('prev');
}
});

function closeOverlay() {
const overlay = document.getElementById('zoomoverlay');
overlay.classList.remove('show');

setTimeout(() => {
overlay.style.display = 'none';
}, 300);
}
});