Screen part (full assembly)

Watch the tutorial on YouTube


Replacement Instructions

45 min
Hard

Required tools:

A soft surface
– For example, you can use a towel

A container to keep the screws
– Make sure not to lose the screws

Screen part (full assembly)
Screwdriver
Spudger (or a similar plastic tool)
Thermal paste with spatula
Metal cleaner
Wet wipes
Microfiber cleaning cloth

Place the laptop upside down on a soft surface.

This helps prevent scratches on the laptop lid.

Then remove all screws using the screwdriver.

Insert the spudger between the bottom case and the hinge.

Gently apply pressure at the hinge area. Do this on both sides. You can now carefully remove the bottom case completely.

Disconnect the battery.

Then disconnect the two other cables that are connected to the heatsink.

Be careful — the cables may be quite tight.

Take a screwdriver and remove the screws.

The screws labeled 1 and 2 cannot be fully removed.

The screws labeled 3, 4, and 5 can be fully removed.

Use a spatula to remove the thermal paste from both the motherboard and the heatsink.

Wipe the area with a damp cloth.

Use the metal cleaner to remove any remaining residue.

To loosen the hinges, remove the screws.

Once the screws are out, disconnect the display cable.

Carefully guide the display cable toward the hinges.

To loosen the hinges, remove the screws.

Once the screws are removed, disconnect the camera and microphone module.

Carefully guide the module toward the hinges.

Take a spudger and gently place it underneath the hinge.

Note: this step is not easy.

Apply a fair amount of force and push the hinges upward until they can’t move any further.

When the hinges are lifted, the cables might get in the way.

Make sure to click the cables just past the grey edge.

If this isn’t done properly, you won’t be able to remove the screen.

Hold the chassis with both hands at each corner.

Gently lift the chassis upward toward the hinges.

Once you reach the hinges, click the chassis loose from the screen.

Place the new screen flat in front of you in the same orientation.

Install the C-cover onto your new screen.

When clicking it into the hinges, make sure the C-cover hooks in properly behind them.

Carefully guide the camera and microphone module back toward the connector.

Do the same with the display cable. Note: it only fits one way — do not force it.

Press the hinges back into their original position. They should fit perfectly into the grey circular guides.

Insert 2 screws on the left side where the small plus signs are.

Insert 3 screws on the right side (see photo).

Important: make sure the screws are placed in the correct locations.

Take some thermal paste from the container and spread it evenly across the width of the spatula.

Then apply it evenly over the CPU.

Important: the CPU (mirror) should no longer be visible, and the paste must be spread out evenly.

Reinsert the screws into the correct positions.

Reconnect the two cables of the heatsink into their proper connectors.

Also reconnect the battery cable.

Place the bottom case back in the correct position.

Gently press down on all sides.

Make sure the bottom case is properly aligned and fully secured all around.

Use the screwdriver to put the screws back in place.

This was the final step. Your laptop is now ready for use.

Well done!

×
❮

❯

.image-container {
}

.zoom-image, .aligncenter.size-large {
}

.zoom-image:hover {
}

.zoomoverlay {
display: none;
position: fixed;
transition: opacity 0.3s ease !important; /* Fade effect */
}

.zoomoverlay.show {
display: flex; /* Make it a flex container when shown */
opacity: 1; /* Fully visible */
}

.zoomoverlay img {
}

#close {
position: absolute;
top: 20px;
}
.nav-btn {
position: absolute;
top: 50%;
transform: translateY(-50%);
background-color: rgba(255, 255, 255, 0.3);
font-size: 24px;
transition: background-color 0.3s ease;
z-index: 11;
}

.nav-btn:hover {
background-color: rgba(255, 255, 255, 0.6);
}

.prev-btn {
left: 20px;
}

.next-btn {
right: 20px;
}

document.addEventListener('DOMContentLoaded', function() {
const parentDiv = document.getElementsByClassName('repair-badges')[0].parentElement;
const images = parentDiv.querySelectorAll('img[src$=".png"]');
let imageArray = []; // Array om alle afbeeldingen op te slaan
let currentImageIndex = 0; // Huidige afbeelding bijhouden

images.forEach((image, index) => {
// Check if the image is inside an anchor tag and skip if it is
if (image.parentElement.tagName.toLowerCase() === 'a') {
return; // Skip this image
}

image.classList.add('zoom-image'); // Add the zoom class
imageArray.push(image); // Voeg toe aan array

image.addEventListener('click', function() {
currentImageIndex = imageArray.indexOf(this); // Stel huidige index in
showImage(this.src);
});
});

function showImage(src) {
const overlay = document.getElementById('zoomoverlay');
const enlargedImage = document.getElementById('enlargedImage');
let originalSrc = src;

// Check for the '300x' in the filename
if (originalSrc.includes('300x')) {
const lastDashIndex = originalSrc.lastIndexOf('-');
if (lastDashIndex !== -1) {
originalSrc = originalSrc.substring(0, lastDashIndex) + '.png';
}
}

enlargedImage.src = originalSrc;

// Show the overlay with fade-in
overlay.style.display = 'flex';
setTimeout(() => {
overlay.classList.add('show');
}, 10);
}

function navigateImage(direction) {
if (imageArray.length === 0) return;

if (direction === 'next') {
currentImageIndex = (currentImageIndex + 1) % imageArray.length;
} else if (direction === 'prev') {
currentImageIndex = (currentImageIndex - 1 + imageArray.length) % imageArray.length;
}

showImage(imageArray[currentImageIndex].src);
}

document.getElementById('close').addEventListener('click', closeOverlay);
document.getElementById('prevBtn').addEventListener('click', () => navigateImage('prev'));
document.getElementById('nextBtn').addEventListener('click', () => navigateImage('next'));

// Close overlay if clicking elsewhere on the overlay
document.getElementById('zoomoverlay').addEventListener('click', function(e) {
if (e.target !== this && !e.target.classList.contains('nav-btn')) return;
closeOverlay();
});

// Keyboard navigation
document.addEventListener('keydown', function(event) {
const overlay = document.getElementById('zoomoverlay');
if (!overlay.classList.contains('show')) return; // Alleen actief als modal zichtbaar is

if (event.key === 'Escape') {
closeOverlay();
} else if (event.key === 'ArrowRight') {
navigateImage('next');
} else if (event.key === 'ArrowLeft') {
navigateImage('prev');
}
});

function closeOverlay() {
const overlay = document.getElementById('zoomoverlay');
overlay.classList.remove('show');

setTimeout(() => {
overlay.style.display = 'none';
}, 300);
}
});