English
Español
Français
Português
BTC
ETH
LTC
BCH
USDT
DOGE
DASH
USDC
XRP
XMR
TRX
BNB
SHIB
SOL
DAI
ZEC
ETC
POL
ADA
XLM
Main FPC cable
$20.97
₿ 0.00031
Especificaciones principales
- Step 1
- Remove the battery cover
- Step 2
- Remove the battery
- Step 3
- Remove the 8 screws
- Step 4
- Remove the screws at the bottom of the SHIFTphone
- Step 5
- Use the spudger to remove the screen display from the casing
- Step 6
- Unscrew the 2 screws, remove the metal bar, and disconnect the main FPC cable
Especificaciones
- Step 1
- Remove the battery cover
- Step 2
- Remove the battery
- Step 3
- Remove the 8 screws
- Step 4
- Remove the screws at the bottom of the SHIFTphone
- Step 5
- Use the spudger to remove the screen display from the casing
- Step 6
- Unscrew the 2 screws, remove the metal bar, and disconnect the main FPC cable
- Step 7
- Remove the bottom daughterboard
- Step 8
- Remove the main FPC cable
- Step 9
- Install the new main FPC cable
- Step 10
- Reinsert the bottom daughterboard
- Step 11
- Replace the metal bar and reattach everything
- Step 12
- Reattach the screen display to the casing
- Step 13
- Reinsert the battery
- Step 14
- Reattach the battery cover
Descripción
Watch the tutorial on YouTube
Replacement Instructions
5 min
Very Easy
Requirements:
A soft surface
– For example, you can use a towel
Spudger
Micro screwdriver
Place the SHIFTphone upside down on a soft surface.
This prevents scratches on the SHIFTphone.
Then remove the battery cover using the opener on the side of the battery cover.
Place the SHIFTphone with the camera facing up on a soft surface.
Take the opener and place one end underneath the battery in the middle.
Then make a 45-degree movement with the opener and lift the battery up.
Carefully unscrew all 8 screws.
Use a suitable screwdriver to avoid damage.
Set the screws aside so you don’t lose them.
Hold the SHIFTphone securely on both sides.
Unscrew the fasteners at the bottom.
Apply just enough force to unscrew them.
Use a spudger to carefully detach the screen.
Run along the edges to click the clips loose.
Do not detach the screen without first loosening everything.
Unscrew the 2 screws.
Remove the metal bar after unscrewing the screws.
Disconnect the main FPC cable from the casing.
Unscrew the fasteners of the board.
Gently lift the board up.
Carefully disconnect the cables.
Carefully remove the main FPC cable from the SHIFTphone.
It is secured on both sides, lift it upward from these points.
Make sure not to damage any connectors or surrounding parts.
Click the top of the main FPC cable into place.
While securing the bottom, gently lift the bottom daughterboard and attach the bottom.
Check that the cable is properly and securely connected.
Place the board back in its position.
Reconnect all cables.
Screw the board securely in place.
Reinsert the main FPC cable.
Position the metal bar back correctly.
Screw the two screws back in.
Carefully place the screen display back onto the casing.
Press the screen firmly along the edges.
Check that the screen is securely attached all around.
Reinsert the battery into the SHIFTphone.
Ensure it is placed correctly in the SHIFTphone.
With the SHIFT logo facing up, and the + and – positioned at the top left.
Place the SHIFTphone upside down again on a soft surface.
Take the battery cover and position it correctly on the SHIFTphone.
Press down at 8 points to ensure the battery cover is securely attached.
Replacement Instructions
5 min
Very Easy
Requirements:
A soft surface
– For example, you can use a towel
Spudger
Micro screwdriver
Place the SHIFTphone upside down on a soft surface.
This prevents scratches on the SHIFTphone.
Then remove the battery cover using the opener on the side of the battery cover.
Place the SHIFTphone with the camera facing up on a soft surface.
Take the opener and place one end underneath the battery in the middle.
Then make a 45-degree movement with the opener and lift the battery up.
Carefully unscrew all 8 screws.
Use a suitable screwdriver to avoid damage.
Set the screws aside so you don’t lose them.
Hold the SHIFTphone securely on both sides.
Unscrew the fasteners at the bottom.
Apply just enough force to unscrew them.
Use a spudger to carefully detach the screen.
Run along the edges to click the clips loose.
Do not detach the screen without first loosening everything.
Unscrew the 2 screws.
Remove the metal bar after unscrewing the screws.
Disconnect the main FPC cable from the casing.
Unscrew the fasteners of the board.
Gently lift the board up.
Carefully disconnect the cables.
Carefully remove the main FPC cable from the SHIFTphone.
It is secured on both sides, lift it upward from these points.
Make sure not to damage any connectors or surrounding parts.
Click the top of the main FPC cable into place.
While securing the bottom, gently lift the bottom daughterboard and attach the bottom.
Check that the cable is properly and securely connected.
Place the board back in its position.
Reconnect all cables.
Screw the board securely in place.
Reinsert the main FPC cable.
Position the metal bar back correctly.
Screw the two screws back in.
Carefully place the screen display back onto the casing.
Press the screen firmly along the edges.
Check that the screen is securely attached all around.
Reinsert the battery into the SHIFTphone.
Ensure it is placed correctly in the SHIFTphone.
With the SHIFT logo facing up, and the + and – positioned at the top left.
Place the SHIFTphone upside down again on a soft surface.
Take the battery cover and position it correctly on the SHIFTphone.
Press down at 8 points to ensure the battery cover is securely attached.
Más productos de NovaCustom
Todos los productos
$20.97
₿ 0.00031
