English
Español
Français
Português
BTC
ETH
LTC
BCH
USDT
DOGE
DASH
USDC
XRP
XMR
TRX
BNB
SHIB
SOL
DAI
ZEC
ETC
POL
ADA
XLM
Microphone
$32.01
₿ 0.00048
Principais especificações
- Step 1
- Remove the battery cover
- Step 2
- Remove the battery
- Step 3
- Remove the 8 screws
- Step 4
- Remove the screws at the bottom of the SHIFTphone
- Step 5
- Use the spudger to remove the screen display from the case
- Step 6
- Unscrew the 2 screws, remove the metal bar, and disconnect the main FPC cable
Especificações
- Step 1
- Remove the battery cover
- Step 2
- Remove the battery
- Step 3
- Remove the 8 screws
- Step 4
- Remove the screws at the bottom of the SHIFTphone
- Step 5
- Use the spudger to remove the screen display from the case
- Step 6
- Unscrew the 2 screws, remove the metal bar, and disconnect the main FPC cable
- Step 7
- Remove the bottom daughterboard
- Step 8
- Remove the microphone
- Step 9
- Place the new microphone
- Step 10
- Reinstall the bottom daughterboard
- Step 11
- Replace the metal bar and reattach everything
- Step 12
- Reattach the screen display to the case
- Step 13
- Reinsert the battery
- Step 14
- Replace the battery cover
Descrição
Watch the tutorial on YouTube
Replacement Instructions
5 min
Very Easy
Requirements:
A soft surface
– For example, you can use a towel
Spudger
Micro screwdriver
Place the SHIFTphone upside down on a soft surface.
This prevents scratches on the SHIFTphone.
Then remove the battery cover using the opener at the side of the battery cover.
Lay the SHIFTphone with the camera facing up on a soft surface.
Take the opener and place one end in the middle under the battery.
Then make a 45-degree movement with the opener and lift the battery up.
Carefully unscrew all 8 screws.
Use a suitable screwdriver to avoid damage.
Set the screws aside so you don’t lose them.
Hold the SHIFTphone firmly on both sides.
Unscrew the fasteners at the bottom.
Use just enough force to unscrew them.
Carefully use a spudger to pry the screen loose.
Run along the edges to unclip the clips.
Do not detach the screen without first loosening everything.
Unscrew the 2 screws.
Remove the metal bar after unscrewing the screws.
Disconnect the main PFC cable from the case.
Unscrew the fasteners of the board.
Carefully lift the board up.
Gently disconnect the cables.
Carefully disconnect the microphone cable from the motherboard or connector.
Make sure not to apply force to avoid damaging the connection.
Gently remove the microphone from the case without touching other components.
Position the new microphone in exactly the same spot as the old one.
Firmly connect the microphone to the correct connector.
Ensure that the microphone is securely fixed and cannot come loose.
Place the board back in its position.
Reconnect all cables.
Tighten the board securely.
Reinsert the main FPC cable.
Place the metal bar back in the correct position.
Tighten the two screws again.
Carefully place the screen display back onto the case.
Press the screen firmly along the edges.
Check that the screen is securely fixed all around.
Place the SHIFTphone’s battery back in.
Ensure it is positioned correctly in the SHIFTphone.
With the SHIFT logo facing up and the + and – indicators at the top left.
Once again, lay the SHIFTphone upside down on a soft surface.
Take the battery cover and place it back on the SHIFTphone in the correct orientation.
Press on 8 points to ensure the battery cover is secure.
Replacement Instructions
5 min
Very Easy
Requirements:
A soft surface
– For example, you can use a towel
Spudger
Micro screwdriver
Place the SHIFTphone upside down on a soft surface.
This prevents scratches on the SHIFTphone.
Then remove the battery cover using the opener at the side of the battery cover.
Lay the SHIFTphone with the camera facing up on a soft surface.
Take the opener and place one end in the middle under the battery.
Then make a 45-degree movement with the opener and lift the battery up.
Carefully unscrew all 8 screws.
Use a suitable screwdriver to avoid damage.
Set the screws aside so you don’t lose them.
Hold the SHIFTphone firmly on both sides.
Unscrew the fasteners at the bottom.
Use just enough force to unscrew them.
Carefully use a spudger to pry the screen loose.
Run along the edges to unclip the clips.
Do not detach the screen without first loosening everything.
Unscrew the 2 screws.
Remove the metal bar after unscrewing the screws.
Disconnect the main PFC cable from the case.
Unscrew the fasteners of the board.
Carefully lift the board up.
Gently disconnect the cables.
Carefully disconnect the microphone cable from the motherboard or connector.
Make sure not to apply force to avoid damaging the connection.
Gently remove the microphone from the case without touching other components.
Position the new microphone in exactly the same spot as the old one.
Firmly connect the microphone to the correct connector.
Ensure that the microphone is securely fixed and cannot come loose.
Place the board back in its position.
Reconnect all cables.
Tighten the board securely.
Reinsert the main FPC cable.
Place the metal bar back in the correct position.
Tighten the two screws again.
Carefully place the screen display back onto the case.
Press the screen firmly along the edges.
Check that the screen is securely fixed all around.
Place the SHIFTphone’s battery back in.
Ensure it is positioned correctly in the SHIFTphone.
With the SHIFT logo facing up and the + and – indicators at the top left.
Once again, lay the SHIFTphone upside down on a soft surface.
Take the battery cover and place it back on the SHIFTphone in the correct orientation.
Press on 8 points to ensure the battery cover is secure.
Mais produtos de NovaCustom
Todos os produtos
$32.01
₿ 0.00048
