Brewery Chiller - BrewChill Pro 7500 - 7500 BTUs

Once a Canadian brewery moves past pilot scale, cooling needs change: bigger tanks, longer brew days, and less room for a glycol chiller that can't keep up. The BrewChill Pro 7500-2 ships with two 80 gallon per hour vane pumps installed from the factory, both running off the same thermostat, so you get one setpoint across multiple tanks rather than independent zones. If you need two tanks at different temperatures at the same time, look for a model built with two separate thermostats instead.At 7,500 BTU per hour on 208 to 230 volt power, it handles wort chilling, fermentation and bright tank control in setups up to 1,500 liters, backed by an 18 gallon reservoir. Breweries usually move up to this model once a smaller chiller starts falling behind, and the same cooling capacity works well in wineries or cideries managing a full room of tanks through a busy season.
Key Features:

Two pumps, one setpoint: Two built-in 80 gal/hr vane pumps on separate 1/3 HP motors. Both share the same thermostat, so it's one setpoint, not independent zones.

7,500 BTU/h capacity: Rated for fermentation tanks up to 1,500 liters, built for medium-batch Canadian breweries.

Efficient at scale: A 1 HP compressor on R290 refrigerant, strong cooling without a big jump in power costs.

Commercial-grade reliability: Suited to microbreweries, brewpubs and advanced homebrewers who need consistent performance under demanding use.

Quick to install: 3/4" NPT fittings, 6-ft power cord, NEMA 6-20P plug for fast setup in new or existing Canadian systems.

450-ft line reach: Flexible placement across larger brewing facilities.

Parts Included:

1 × BrewChill Pro 7500 (80 GPH pump, 1/3 HP motor)
1 × External digital thermostat
4 × Solenoid valves

BrewChill Pro 7500 - Canada

MAXIMUM DISTANCE
Up to 450 ft

GLYCOL TANK CAPACITY
18 gallons

COMPRESSOR POWER
1/2 HP

PLUG TYPE (NEMA #)
6-20P

PUMP TYPE
Vane with 1/3hp motor

 NUMBER OF PRE-INSTALLED PUMPS
 2

 NUMBER OF ADDITIONAL PUMPS
 1

 REFRIGERANT CHARGE, G (OZ)
 150 (5.29)

 WEIGHT GROSS/NET
 154 / 147 lb

 POWER CORD LENGTH
 6 ft

 INLET/OUTLET BARB, IN
 red tube 3/4” NPT / blue tube 3/4” NPT

 OPERATING AMBIENT TEMPERATURE
 60-90 F

 CLEARANCE AT LEAST
 12" around the entire unit

GLYCOL MIXTURE, VOL%
40 % glycol and 60% water

Note: Installation of this item must be handled by a qualified installer in order to qualify for product return and/or warranty coverage. Qualified Installer - Defined as a licensed professional who charges a fee for his services, and possesses a business license, contractor's license, and/or resale permit. Common examples of a "qualified installer" include Electrician; General Contractor; Heating and Air Conditioning Specialist.
If you want to confirm 7,500 BTU matches your tank count, our brewery chiller sizing calculator walks through the numbers directly. Larger production setups running at full capacity tend to move up to the BrewChill Pro 13000-2 for its extended 750 foot glycol lines. If you would like help mapping out your glycol lines, contact us and our team will walk through the layout with you.